Mustang GT Drag Radials: Best Picks & Sizes for 2011+ Coyote
Disclosure: Some links on this page go to retailers like Amazon and eBay. If you buy through them, we may earn a commission at no extra cost to you. See our affiliate disclosure.
Mustang GT drag radials are the single biggest change you can make to a Coyote car’s quarter-mile time without touching the engine. A stock 2011+ Mustang GT makes plenty of power, but factory summer tires were never built to launch it hard off a prepped starting line. Put a real drag radial under the rear and the car stops spinning, the 60-foot time drops, and every other mod you add starts to show up on the time slip.
This guide compares the drag radials Coyote owners actually buy, explains the difference between street-legal and race-only tires, and lists the sizes, wheels, and supporting parts that make them work. Scope is 2011+ Coyote Mustangs only: the 2011-2014 S197 GT and Boss 302, the 2015-2023 S550, and the 2024+ S650. Tire facts come from Mickey Thompson and Nitto spec pages we checked in October 2026. Prices move constantly, so treat any dollar figure here as a ballpark.

Quick Answer: Best Mustang GT Drag Radials
| If you want… | Our pick | Why |
|---|---|---|
| A daily driver that also sees the strip | Mickey Thompson ET Street S/S | Built as a street tire for the drag strip, with more tread void for wet roads and the R2 compound |
| The most grip you can still drive on the street | Mickey Thompson ET Street R or Nitto NT555RII | Both are D.O.T. street-legal drag radials with minimal tread and a sticky compound |
| A trailer or track-only car | Mickey Thompson ET Street Radial Pro | D.O.T. approved but Mickey Thompson says it is for drag racing only, not street use |
| The widest size choice for 18, 19 and 20 inch wheels | Nitto NT555RII | Nitto lists sizes from 15 to 22 inches, including many 18-20 inch fitments |
Our short version: most owners shopping for Mustang GT drag radials for a street car end up on either the ET Street R or the NT555RII. If the car lives outside and sees rain, the ET Street S/S is the safer choice. If the car never touches a public road, the Radial Pro is the most race-focused option in this group.
Why a Coyote Mustang Needs Drag Radials
A Coyote 5.0 makes its power high in the rpm range, and the S550 and S650 GTs especially have more power than a 275-section summer tire can put down on a hard launch. Drag radials use a soft compound, a flexible sidewall, and very little tread so more rubber sits on the track. The sidewall wrinkles on the launch, which helps the tire hook instead of spinning.
In plain terms, drag radials help you get the power you already have to the ground. That is why we put them early in every level of our Coyote Mustang drag build guide. Gains vary a lot with the car, the track prep, the weather, and the driver, so we will not promise a number. Many owners report that the 60-foot time improves more from tires and launch technique than from any bolt-on power part.
- Better 60-foot times: the first 60 feet set up the whole run, and this is where drag radials help most.
- More consistent passes: less wheelspin means less pedaling and more repeatable times, which matters for bracket racing (see our Mustang GT bracket racing build).
- Room for more power: a tune, rear gears, or a supercharger only pay off if the tires can use them.
Street-Legal vs Race-Only Drag Radials
Every tire in this guide carries a D.O.T. rating, but that does not mean they are all meant for the street. Mickey Thompson spells this out on its ET Street Radial Pro page: the tire is D.O.T. approved but designed for drag racing use only. Read the maker’s wording before you plan to drive on a set.
| Tire | Maker’s intended use | Tread | Best fit |
|---|---|---|---|
| Mickey Thompson ET Street S/S | Street tire for the drag strip | More grooves, built for hydroplane resistance | Daily drivers, mild bolt-on cars |
| Mickey Thompson ET Street R | Street-legal drag tire | Minimal tread void for maximum contact | Weekend street cars that race often |
| Nitto NT555RII | D.O.T.-compliant competition drag radial; drive to the track and home | Large circumferential grooves to help in the wet | Drive-to-the-track cars, wide size range |
| Mickey Thompson ET Street Radial Pro | Drag racing use only, not for street use | Race tread | Trailered and track-only cars |
Our opinion: be honest about how you use the car. Drag radials of any kind are poor in the rain and wear quickly on the street, and a soft race-focused tire on a daily driver is a bad trade. If the Mustang is your only car, start with the ET Street S/S and keep a set of normal tires for winter and wet weather.
Best Mustang GT Drag Radials Compared
Mickey Thompson ET Street R
The ET Street R is the tire most Coyote owners mean when they say “drag radials.” Mickey Thompson describes it as a D.O.T. street-legal drag tire with race compounds, minimal tread void, and tubeless construction. Its spec table lists the R2 compound across the line, with 17-inch sizes including P275/40R17, P285/45R17, P305/45R17, P315/35R17 and P315/50R17, and 18-inch sizes including P305/45R18, P315/40R18, P325/35R18 and P345/35R18. There are also 20-inch options.
- Mickey Thompson ET Street R drag radial: Amazon
Mickey Thompson ET Street S/S
The ET Street S/S is the street-first option. Mickey Thompson calls it a high performance street tire for the drag strip, with the same R2 compound and about the same amount of tread void as its older ET Street Radial II, but with the grooves arranged for better hydroplane resistance. The maker also says it needs little or no burnout. Sizes run from 15 to 20 inches, including P275/40R17, P305/45R17, P285/40R18, P305/35R18, P305/35R19 and P325/30R19, which helps owners who want to keep larger wheels.
- Mickey Thompson ET Street S/S: Amazon
Nitto NT555RII
The Nitto NT555RII is a D.O.T.-compliant competition drag radial that Nitto pitches as a tire you can drive to the track, race, and drive home on. Nitto says the large circumferential grooves help in the wet and the high-grip compound and semi-racing construction add traction at the starting line. The size list is the widest here, with 15 to 22 inch options, including P275/40R17, P305/45R17, P315/35R17, P275/40R18, P305/45R18, 275/40R19, 305/35R19 and several 20-inch sizes. That makes it a common pick for Mustang GT drag radials on larger wheels.
- Nitto NT555RII drag radial: Amazon
Mickey Thompson ET Street Radial Pro
The ET Street Radial Pro is the race-only tire in this group. Mickey Thompson lists 17-inch P305/45R17 and P315/50R17 sizes and an 18-inch P305/45R18, all in R2 compound, and states that the tire is not for street use. It suits trailered Coyote cars chasing the 10s and quicker, where the rest of the car is built to match.
- Mickey Thompson ET Street Radial Pro: Amazon
Mustang GT Drag Radial Sizes by Generation
There is no single correct size, because it depends on the wheel, the brakes, and how much rubbing you will accept. The sizes below are ones Mustang owners commonly run, and every one of them appears on the tire maker’s size list. Always confirm the size against your wheel width and check clearance on your own car before a pass. If you are not sure which generation you have, our S197 vs S550 vs S650 guide explains the differences.
2011-2014 S197 Mustang GT and Boss 302

The S197 has a solid rear axle, which launches well on a drag radial once the suspension is sorted. Many owners run a 17-inch drag wheel with a tire such as a P275/40R17 or P305/45R17, while others keep 18s and choose an 18-inch radial. Wheel hop and axle wrap are common on the S197, so plan on upgraded rear control arms. Our 12-second Coyote build covers the suspension side.
2015-2023 S550 Mustang GT
The S550 uses independent rear suspension, and wheel hop on hard launches is the main problem drag radials expose. Our Mustang GT wheel hop fix guide covers the subframe kits that cure it. Popular S550 drag setups use a 17-inch rear wheel with a tire in the P275/40R17 to P315/35R17 range, or an 18-inch rear with something like a P305/45R18 or P315/40R18. Brake package matters: cars with the larger Performance Package brakes may not clear some 17-inch wheels, so confirm brake clearance with the wheel maker before you buy.
2024+ S650 Mustang GT

The S650 is newer, so wheel and tire packages are still settling. Larger factory brakes push many owners toward 18, 19 or 20 inch drag wheels, which is where the wide size lists of the ET Street S/S and NT555RII help. Check that any wheel lists S650 fitment and brake clearance by name, and expect to dial in the traction and launch control settings along with the tune.
| Generation | Common drag wheel diameters | Example drag radial sizes on maker lists | Watch out for |
|---|---|---|---|
| 2011-2014 S197 | 17 or 18 inch | P275/40R17, P305/45R17, P305/45R18 | Axle wrap and wheel hop |
| 2015-2023 S550 | 17 or 18 inch | P275/40R17, P315/35R17, P305/45R18, P315/40R18 | IRS wheel hop, Performance Package brake clearance |
| 2024+ S650 | 18 to 20 inch | P305/35R19, 305/35R19, P305/35R20 | Brake clearance, newer wheel fitment lists |
Drag Wheels for Mustang GT Drag Radials
Most owners pair drag radials with a dedicated set of drag wheels so they can swap at the track and keep normal tires for the street. A lighter wheel with a smaller diameter allows a taller sidewall, which usually helps the tire wrinkle and hook. Brands that sell 17 and 18 inch Mustang drag wheels include Weld, Race Star and Billet Specialties. Fitment, offset and brake clearance vary by year, so buy from the maker’s listing for your exact car.
Mickey Thompson’s own spec pages carry two warnings worth repeating: never use rim screws on radial drag tires, and do not run their drag tires on a dyno. Keep a separate set of tires for dyno days.
Parts Needed
- Drag radials for your size — the main part
- Drag wheels
- Extended wheel studs (if your wheel maker calls for them): Amazon
- Lug nuts matched to your wheels
- TPMS sensors for the drag wheels
- Metal valve stems
- Rear control arms or IRS bushings
Tools Needed
- Low-pressure digital tire gauge: Amazon
- Portable air compressor
- Torque wrench (1/2 inch drive): Amazon
- Low-profile floor jack
- Jack stands
- Lug nut socket set (thin wall)
- Tire and wheel cart or storage bags
Torque lug nuts to the wheel maker’s spec or the factory manual and recheck them after the first pass. We are not listing torque values here on purpose, because they depend on the wheel and stud.
Tire Pressure, Burnouts and Launch Tips
Drag radials are sensitive to air pressure. Many racers run lower pressure at the track than on the street, but the right number depends on the tire, the car’s weight, and the track, so start with the tire maker’s guidance and adjust a little at a time. Nitto’s load capacity bulletin is worth reading: several NT555RII sizes are Light Load tires, and Nitto says plus-size tires may need more pressure than the door placard to carry the same load as the factory tire. Never drive on the street with track pressures.
- Keep burnouts short. Radials need heat, not smoke. Mickey Thompson says the ET Street S/S needs little or no burnout.
- Take it easy on the launch at first. Radials like a smooth hit. Too much rpm can blow the tire off, and too little can bog the Coyote.
- Fix wheel hop before you add power. Hop can break axles and half-shafts. See our Mustang GT coilovers guide and lowering springs guide before lowering a drag car, since too low can hurt weight transfer.
- Manual cars need a healthy clutch. Sticky tires put more load on the clutch and driveline. Our Mustang GT clutch upgrade guide covers the options.
- Let the tune help. A good Coyote tuner can adjust launch control and traction settings to match the tire.
How Much Do Mustang GT Drag Radials Cost?
In October 2026, retailers listed popular 17 and 18 inch ET Street R sizes at roughly $335 to $490 per tire, with 20-inch sizes higher. A full drag setup usually means two rear radials, a pair of drag wheels, mounting and balancing, and often new studs or TPMS sensors. Our rough guess for a complete rear drag radial and wheel package is somewhere around $1,500 to $3,000 or more, depending on the wheel brand and size. Prices change often, so check current listings.
- Mustang GT drag radial and wheel packages on eBay
- Mickey Thompson ET Street R and Nitto NT555RII: search by your exact size, and check the date code on any used set
Used drag wheels are often a good deal. Used drag radials are riskier: check the date code, look for cracks or cords, and ask how many passes they have. Drag radial compounds can harden with age, so a cheap old set is not always a bargain.
Where Drag Radials Fit in a Coyote Drag Build
Drag radials belong near the top of the list for any Coyote drag car. On a mostly stock Mustang GT they are a big part of the plan in our 12-second build guide. As power climbs, the 11-second and 10-second guides add suspension, driveline and safety parts that let the tires do their job. The full roadmap is in our Coyote Mustang drag build guide.
Mustang GT Drag Radials FAQ
Are drag radials street legal on a Mustang GT?
Some are. The Mickey Thompson ET Street R, ET Street S/S, and Nitto NT555RII are sold as D.O.T. street-legal or drive-to-the-track tires. The ET Street Radial Pro is D.O.T. approved but Mickey Thompson says it is for drag racing only, not street use.
What size drag radials fit a Mustang GT?
It depends on the generation, wheel, and brakes. Many S197 and S550 owners run 17 or 18 inch drag wheels with sizes such as P275/40R17, P305/45R17, or P305/45R18. S650 owners often need 18 to 20 inch wheels to clear the brakes. Always check the tire maker’s approved rim widths and your wheel maker’s fitment.
Can I drive on drag radials in the rain?
You can, but carefully. Drag radials have far less tread than normal tires. The ET Street S/S and NT555RII have more grooves for wet roads than race-focused tires, but none of them is a good rain tire.
Do I need drag wheels to run drag radials?
Not always, since some radials come in 19 and 20 inch sizes. But a dedicated set of 17 or 18 inch drag wheels gives a taller sidewall, usually launches better, and lets you swap back to street tires.
How much do drag radials help a Mustang GT?
Results vary with the car, track, weather, and driver, so there is no guaranteed number. Many owners see the biggest improvement in their 60-foot time, which also lowers the overall quarter-mile time.
Bottom Line
The best Mustang GT drag radials are the ones that match how you use the car. For a street car that races now and then, the ET Street S/S is the safe pick. For a weekend car that sees the strip a lot, the ET Street R or Nitto NT555RII gives more grip and still drives home. For a trailered race car, the ET Street Radial Pro is the most race-focused choice. Pick a size the maker approves for your wheel width, confirm brake clearance, fix wheel hop, and start with conservative launches.
Featured photo: TaurusEmerald, CC BY-SA 4.0, via Wikimedia Commons (cropped).