eBay Finds: Nitrous Setup for 2015–17 GT, MBRP S650 Axle-Back & C&L Cold Air Intake
Disclosure: This post contains eBay and Amazon affiliate links. As an eBay Partner Network participant and Amazon Associate, this site may earn a commission from qualifying purchases at no extra cost to you. See our affiliate disclosure for details. We only feature 2011+ Coyote Mustang parts (S197 Coyote, S550, S650) from individual or small private sellers, not high-volume dealer warehouses.
Thursday’s eBay Finds starts with a complete single-stage nitrous setup listed for 2015–2017 Mustang GTs — with a big fitment caveat you’ll want to read before you bid. After that, it’s an MBRP Armor Pro axle-back for the new S650 GT and a shelf-stored C&L cold air intake for 2011–2014 Coyotes. We hunted for private-seller supercharger kits, turbo packages, and header sets for the 5.0 Coyote again, and came up empty: everything that turned up was a dealer listing. Every find here comes from an individual seller, and none have appeared in an earlier eBay Finds post. Prices were current when we checked on Oct. 15, 2026, and listings can sell or change at any time.
Listing ended? eBay listings sell or end fast. If a listing in this post has ended, see similar mustang gt coyote nitrous kit listings on eBay.
Complete Single-Stage Nitrous Setup (Listed for 2015–2017 Mustang GT — Fitment Unverified)
- Price: $799.00 (Buy It Now or Best Offer)
- Condition: Used
- Seller: chalm-80 (22 feedback, 100% positive, member since Sep. 2024), individual seller
- Shipping: Free UPS Ground from Costa Mesa, CA. Local pickup also offered. No returns.
- eBay item #: 398164998094
Why it’s worth a look
This is the “wow” find of the day if the fitment checks out. The seller describes a full single-stage nitrous setup: a Nitrous Outlet X-Series 10 lb bottle with high-flow valve, a WinMax TPS/RPM window switch, nitrous and purge solenoids, a bottle heater wrap, an NX 4-switch billet panel, braided -AN lines, a bottle bracket, and a relay. They say it flows up to 300 HP and that the parts would run $1,200+ new. The Buy It Now is $799 with Best Offer (the description also says “selling for $700”), and shipping is free UPS Ground. The main photo shows the bottle; alt photos show the window switch and the NX panel with braided line.
Fitment notes
Read this before you buy. The title says “Nitrous Express Kit 2015-2017 GT Mustang,” but the description never mentions a Mustang, a year, or any Coyote-specific part. The bottle label says Nitrous Outlet, while the title and brand field say Nitrous Express — it’s a mix of brands, not one sealed kit. Treat the year fitment as unverified until the seller confirms it was pulled from (or built for) a 2015–2017 Mustang GT. Nitrous on a Coyote is serious power-adder territory; if you’re building toward low ETs, our guide on how to build a 9-second Coyote Mustang covers the supporting mods and NHRA rules. Always follow bottle mounting, purge, and safety guidelines for your sanctioning body.
Questions to ask the seller
Ask the seller to confirm the donor car (year, model, VIN if possible) and whether this was run on a Coyote GT. Get a full parts list with brand and part numbers for the solenoids, jets, and window switch. Ask for close-ups of every component, including the solenoids and lines. The listing shows money order and the description mentions cash — pay only through eBay checkout so the Money Back Guarantee applies. No returns, so get every answer in writing before you buy.
MBRP Armor Pro 2.5″ Axle-Back with Quad Tips (2024–2026 Mustang GT S650)
- Price: $325.00 (Buy It Now or Best Offer)
- Condition: Used
- Seller: bellatyle (19 feedback, 100% positive, member since Sep. 2014), individual seller
- Shipping: About $38.35 FedEx Ground from Oklahoma City, OK. No returns.
- eBay item #: 257737817351
Why it’s worth a look
MBRP’s Armor Pro axle-back is a T304 stainless, race-profile system with a dual-split rear and quad tips. The seller lists MPN S7281304 and says, “Has everything it came with.” The photo shows the pipes plus four MBRP tip boxes on a patio, which matches the quad-tip description. At $325 with Best Offer, it’s a solid used price for an S650 GT axle-back — new systems in this class usually run a lot more.
Fitment notes
This is for 2024–2026 Mustang GT 5.0 only (S650). It will not fit 2015–2023 S550 cars. If you’re not sure which generation you have, our S197 vs S550 vs S650 guide breaks it down. And if you’re weighing axle-back vs a full cat-back, see our axle-back vs cat-back guide.
Questions to ask the seller
Ask whether all hangers, clamps, and tip hardware are included. Confirm the tips are the quad set shown in the boxes. Ask for close-ups of weld quality and any scratches from install or removal. Money order is listed as a payment option — pay only through eBay checkout. No returns, so lock down fitment and contents first.
C&L Cold Air Intake for 2011–2014 Mustang GT 5.0 (S197 Coyote)
- Price: $150.00 (Buy It Now or Best Offer)
- Condition: Used
- Seller: savedbygrace417 (112 feedback, 100% positive, member since Feb. 2011), individual seller
- Shipping: About $31.54 FedEx Ground from Ozark, MO. No returns.
- eBay item #: 940014185368
Why it’s worth a look
A C&L cold air intake is a classic S197 Coyote upgrade, and this one has been sitting on a shelf for several years. The seller says, “Great condition, has been on a shelf for several years, needed to clean out my garage.” The photo shows the C&L filter, 95mm MAF housing, intake tube, couplers, clamps, and an instruction sheet labeled for 2011–2014 Mustang GT — so you’re seeing a kit layout, not just a filter in a box. At $150 with Best Offer, it’s a fair used price for a complete C&L setup.
Fitment notes
Listed for 2011–2014 Mustang GT 5.0 (S197 Coyote). The eBay brand field wrongly says Ford — this is a C&L Performance intake. It will not fit S550 (2015+) or S650 cars without major changes. For broader Coyote build context, see our Coyote 5.0 build guide.
Questions to ask the seller
Ask whether the MAF sensor is included (many used intakes ship without it) and whether all couplers and clamps shown are in the box. Ask for close-ups of the filter condition and any cracks in the tube or housing. Since it’s been on a shelf for years, plan to clean the filter and check the MAF housing before install. Pay only through eBay checkout — money order is listed as an option. No returns.
Buying tips for nitrous, axle-backs, and cold air intakes
Treat nitrous fitment and safety as non-negotiable
A title that names a Mustang year is not the same as confirmed fitment. Ask for the donor car and part numbers before you buy any used nitrous kit. Mount the bottle with a proper bracket, use a blow-down tube where required, and get a current rulebook for your track or sanctioning body. A bottle heater and a working purge help consistency; a car fire extinguisher belongs in any power-adder build. If low ETs are the goal, our 9-second Coyote Mustang guide covers cages, chutes, and NHRA rules.
Match the axle-back to S650 — not S550
2024–2026 Mustang GT axle-backs do not swap onto 2015–2023 cars. Confirm the MPN (today’s MBRP is S7281304) and look it up before you buy. Our S197 vs S550 vs S650 guide and axle-back vs cat-back guide help you pick the right path. A set of exhaust hanger pliers and penetrating oil make the swap less of a fight, and a metric socket set covers the clamps.
Clean and verify a shelf-stored cold air intake
Used intakes often sit for years. Clean the filter, inspect the tube and couplers for cracks, and confirm whether the MAF sensor is included — many kits ship without it. A can of MAF sensor cleaner and a fresh air filter cleaning kit are cheap insurance before you bolt it on. For broader Gen 1 Coyote context, see our Coyote 5.0 build guide.
Protect yourself on money-order listings and no-return sellers
- Pay through eBay checkout so the Money Back Guarantee applies. Skip money orders, cash, and any “pay direct” offers, even if the listing shows them.
- All three of today’s sellers list no returns, so get every question answered in eBay messages before you buy.
- On the nitrous kit, treat the Mustang year in the title as a claim to verify — not a fact — until the seller confirms donor car and fitment.
- Low feedback isn’t automatically a bad deal, but ask for clear photos, part numbers, and how the part was removed.
Looking for more? Catch up on yesterday’s eBay Finds with a Gen 2 Coyote dropout, Corsa Sport cat-back, and Kooks axle-back, or check out today’s BaT Finds on a 41k-mile 2012 Roush Stage 2 Mustang GT.