Coyote supercharger installed: Roush TVS positive-displacement blower and intake on the 5.0 V8 of a red 2013 Roush Stage 3 Mustang
| | |

Coyote Supercharger Buyer’s Guide: Whipple vs Roush vs ProCharger vs VMP for the 2011+ Mustang GT

Disclosure: Some links on this page go to retailers like Amazon and eBay. If you buy through them, we may earn a commission at no extra cost to you. See our affiliate disclosure.

Nothing changes a Coyote Mustang like a supercharger. A good kit can add hundreds of horsepower, keep the car smooth enough to drive every day, and in some cases stay emissions legal and carry a warranty. The hard part is choosing. Whipple, Roush, ProCharger, and VMP all build kits for the 5.0, they work in different ways, and the price on the box is only part of what you will spend.

Coyote supercharger installed: Roush TVS positive-displacement blower and intake on the 5.0 V8 of a red 2013 Roush Stage 3 Mustang
A Roush TVS supercharger on the Coyote 5.0 of a 2013 Roush Stage 3 Mustang, shown at a car show in Australia. Photo: sv1ambo, CC BY 2.0, via Wikimedia Commons.

This guide covers 2011 and newer Coyote-powered Mustang GTs only: the S197 (2011-2014), the S550 (2015-2023), and the S650 (2024 and newer). Every horsepower, torque, boost, price, and emissions figure below comes from the manufacturer’s own product page as we checked it on October 20, 2026, and we link the source each time. Makers change kits, prices, and ratings often, so check the current listing before you buy. Anything we could not confirm is labeled as a rough range or our opinion.

A VMP twin-screw kit and a Roush TVS kit go head to head on two S650 Mustangs on the dyno. Video: The Driver Mod on YouTube.

Quick Answer: Which Coyote Supercharger Should You Buy?

  • You want the most power with stock-like manners and a factory look: a twin-screw kit from Whipple or VMP. Boost comes in almost right away, and Whipple rates its S650 kits at up to 810 to 875 hp on 93 octane.
  • You want a dealer-installed kit with a warranty and a strong brand name: Roush. Its S650 kits are built around a TVS roots-style blower, the Phase 2 lists a CARB Executive Order, and Roush offers 3-year/36,000-mile coverage when the kit is installed the way Roush specifies.
  • You want the most room to grow, the lowest heat, or the lightest kit: ProCharger. A centrifugal blower builds boost with rpm, runs cooler, and ProCharger lists intercoolers rated well past 1,000 hp for future upgrades.
  • You are on a tight budget or own an S197 or early S550: look hard at used kits, tuner kits (no tune included), and smaller TVS kits, and budget for a custom tune from a shop you trust. Our Mustang GT tuner guide explains the tuning side.

Positive Displacement vs. Centrifugal: How Each Type Makes Boost

Roush positive-displacement supercharger sitting on top of a Ford Mustang V8 in the engine bay
A Roush positive-displacement (Roots-style) blower sits right on top of the V8, which is why this type makes boost the moment you touch the throttle. Shown at the 2005 Essen Motor Show. Photo: Thomas Vogt via Wikimedia Commons, CC BY 2.0.

Every kit in this guide is belt-driven from the crankshaft, but there are two very different designs. Which one you pick changes how the car feels more than the brand name does.

Twin-screw and TVS (roots-style) superchargers

Positive-displacement blowers sit on top of the engine in place of the intake manifold. Whipple and VMP use twin-screw head units, which squeeze the air between two meshing rotors. Roush uses an Eaton TVS rotor pack, a modern roots-style design; Roush’s S650 Phase 2 page lists a TVS R2650. Because they move a fixed amount of air per turn, both make strong boost almost from idle. The result is a huge, flat torque curve and a car that feels like it has a much bigger engine. The trade-offs are more heat under sustained load, a busier engine bay, and an intercooler system that has to be maintained.

Centrifugal superchargers

A centrifugal blower like a ProCharger looks like a turbocharger compressor driven by a belt. It mounts on the front of the engine, and boost climbs with engine rpm, so low-speed driving feels close to stock and the big hit comes up top. Centrifugal kits usually run cooler, weigh less, and leave the factory intake manifold in place. ProCharger’s S650 page says its kit retains the dual throttle bodies and calls it the lightest-weight power adder. The trade-off is less low-end torque, which many drivers see as a plus for traction on the street.

Twin-screw / TVS (Whipple, VMP, Roush)Centrifugal (ProCharger)
Where boost comes inAlmost immediately, flat across the rev rangeBuilds with rpm, strongest near redline
Driving feelLike a much bigger engine everywhereClose to stock at low speed, then pulls hard up top
HeatMore heat under long pulls; relies on air-to-water intercoolingGenerally cooler; ProCharger uses air-to-air intercoolers
MountingReplaces the intake manifold, under the stock hood on current kitsFront of the engine, factory manifold stays
TractionHard to hook on street tiresEasier to hook at low speed
SoundBlower whine, more so with some kitsSignature centrifugal whine and blow-off valve
Upgrade pathPulley and throttle body steps, then fuel and engine workPulley steps, bigger head units, race intercoolers

There is no wrong answer here. Pick the power curve you want to drive every day, then pick the brand.

Coyote Supercharger Kits Compared: 2024+ S650 Mustang GT

The S650 has the most current kit choices, and all four big names list one. These are the makers’ own ratings and list prices as of October 20, 2026. Crank horsepower ratings are on 93 octane in each maker’s ideal conditions, and dealers often sell below list.

KitTypeMaker ratingEmissions (per maker)Warranty (per maker)List price
Whipple Gen 6 3.0L Stage 1Twin-screwUp to 810 hp / 640 lb-ft (Dark Horse reference; GT with standard exhaust typically 8-12 hp less)CARB EO D-231-129, 2024-2025 model years onlySeparate package with 3-yr/36,000-mile limited powertrain warranty ($10,399.99)$9,599.99
Whipple Gen 6 3.0L Stage 2Twin-screw, billet 112mm throttle bodyUp to 875 hp / 660 lb-ft (Dark Horse reference)CARB EO D-231-129, 2024-2025 onlyCheck with Whipple$10,299.99
Roush Phase 1TVS (roots-style)740 hp / 600 lb-ftCheck the listing for your year3-yr/36,000-mile limited powertrain warranty (North America)$9,995.00
Roush Phase 2TVS R2650, 84mm pulley810 hp / 630 lb-ft; 13 psi peak at 7,500 rpmCARB EO D-488-723-yr/36,000-mile parts warranty; powertrain options through the dealer$9,995.00
ProCharger HO Intercooled System (P-1X)Centrifugal325+ hp gain at 11-12 psi“50-state street legal components retained” (ProCharger wording)Powertrain warranty availableKits from $7,999; June 2025 price guide lists the HO system at $9,299 and Stage II at $9,999
VMP Gen 6 3.0L Stage 1Twin-screw, 92mm throttle body, 3.875″ pulley“Over 300 rwhp” gain; VMP dyno: 413 to 701 rwhp on a Dark HorseCARB EO D-231-119Warrantied version with 3-yr/36,000-mile powertrain warranty ($10,499.99)$9,599.99

Notes that matter: Whipple’s page states its CARB order does not cover the 2026 model year, so a 2026 owner in California or another state that follows CARB rules should not assume the kit is street legal. Roush’s Phase 1 is listed “while supplies last.” VMP’s Stage 1 vs. Stage 2 dyno test reports 761 rwhp for its Stage 2 kit, which adds a 112mm throttle body, a 3.75-inch pulley, and a higher rev limit (7,800 rpm vs. 7,500 for Stage 1).

Coyote Supercharger Kits for the 2018-2023 S550 (Gen 3)

The Gen 3 Coyote (2018-2023) is the most supported engine in the aftermarket. It uses both port and direct injection, and kits for it are specific to those years. The listings we confirmed:

KitTypeMaker ratingEmissions / notes (per maker)List price
Whipple Gen 6 3.0L Stage 1 (2018-2021)Twin-screw W185axUp to 750 hp / 640 lb-ft on 93CARB EO D-231-69; HP Tuners MPVI4 flash tool with Whipple calibration support$9,099.99
Whipple Gen 6 3.0L Stage 1 (2022-2023)Twin-screw W185axUp to 750 hp / 640 lb-ft on 93CARB EO D-231-105$9,099.99
Roush Phase 2 (2018-2021 listing)TVS750 hp (per the listing title)Check the listing for your exact year and transmissionSee listing
ProCharger HO Intercooled System, P-1SC-1Centrifugal315+ hp gain at 11-12 psiFactory-airbox version listed at 6.5 psi; Stage II and tuner kits also listed$7,999 (system) per June 2025 guide
VMP Gen 6 3.0L Stage 3 (’18-’23)Twin-screwCheck VMP’s listingVMP sells staged Gen 6 kits for these yearsSee listing

ProCharger’s price guide sells most S550 kits two ways: a full system with tuning, and a cheaper tuner kit that leaves the calibration to you. A tuner kit only saves money if you already have a tuner you trust. For what those kits look like on the used market, see our ProCharger P-1SC-1 eBay finds.

S197 (2011-2014) and Early S550 (2015-2017) Supercharger Options

The Gen 1 (2011-2014) and Gen 2 (2015-2017) Coyotes are port-injected only and have been supercharged for more than a decade. All four brands have built kits for them over the years, but new-kit availability changes. VMP still lists a 2.3L TVS Level 1 kit for 2011-2014 Mustang 5.0 cars. For other brands, check each maker’s current fitment list, and expect a lot of these cars to be boosted with used kits. If you’re building an engine for boost instead of buying a kit first, check out the built Gen 2 Coyote engine we found on eBay, which already has MMR oil pump gears and ARP head studs.

  • Buying used? Make sure the kit matches your exact generation (Gen 1 and Gen 2 parts are not interchangeable with Gen 3 or Gen 4), that every bracket, hose, and sensor is there, and that you have a plan for the tune. A kit with a missing heat exchanger or the wrong fuel parts can cost more to complete than it saved.
  • Watch the rotor pack and bearings. Ask how many miles are on the blower, whether it has been rebuilt or serviced, and, for twin-screws, whether the oil has been changed on the maker’s schedule.
  • Older engines, older parts. On a high-mileage Gen 1 or Gen 2, do a compression or leak-down test before you add boost. Weak rings or a tired valve train will show up fast.

If you have not bought the car yet, our S197 vs. S550 vs. S650 comparison covers the big differences between generations.

Whipple vs. Roush vs. ProCharger vs. VMP: Brand by Brand

ProCharger centrifugal supercharger head unit on a display stand, showing the compressor wheel
A ProCharger centrifugal head unit. Centrifugal blowers spin a compressor wheel like a turbo, so boost builds with RPM. Photo: ProCharger Supercharger Systems, CC BY-SA 4.0, via Wikimedia Commons (cropped).

Whipple

Whipple is the big name in twin-screw superchargers. Its current Coyote kits use the Gen 6 3.0L head unit and, per Whipple, fit under the stock hood with no hood, K-brace, or block cutting on the S650. Whipple’s S650 page lists a dual-core, dual-pass intercooler, an oversized heat exchanger, a high-flow intercooler pump, and a Tomahawk V2 flash tool with Whipple’s calibration. Pick Whipple if you want the biggest rated numbers on 93 octane and like the immediate twin-screw hit.

Roush

Roush is the “factory-feel” choice. Its S650 kits are built around a TVS rotor pack in partnership with Magnuson, per Roush, and Phase 2 reuses the stock dual 80mm throttle bodies. Roush’s supercharger guide says most kits include a Roush-backed 3-year/36,000-mile powertrain warranty if installed by an authorized ASE-certified Roush dealer, so the warranty assumes a dealer install. Roush rates install time at about 10 hours for a skilled installer and calls it advanced. Pick Roush if you want a dealer to do the work and stand behind it.

ProCharger

ProCharger is the centrifugal leader. Its S650 page describes a quick, easy install with common tools, includes ECU and TCU tuning and fuel upgrade components on its full system, and is 100% reversible with no permanent changes. Its price guide lists intercoolers rated at 1,200+ hp and options like a helical gear set for less noise and race blow-off valves. Pick ProCharger if you want a cooler-running, lighter kit with an easy path to more boost later.

VMP Performance

VMP is a tuning shop as well as a kit maker, and that shows in its packages. The S650 Gen 6 3.0L Stage 1 lists 56 lb injectors, a 92mm throttle body sourced from the Shelby GT500 (per VMP’s blog), a Tomahawk flash tool with its tune, and an optional powertrain warranty. Pick VMP if you like the twin-screw feel and want a kit and calibration from the same people.

What about Paxton, Edelbrock, and others?

Other brands, including Paxton (centrifugal) and Edelbrock (roots-style), have offered Coyote kits in the past. We did not confirm current 2011+ Mustang GT listings from them for this guide, so check with the maker directly. Turbo kits are a separate topic and not covered here.

A Whipple-supercharged 2024 Mustang GT on the dyno. Video: Lethal Performance on YouTube.

What a Coyote Supercharger Kit Includes (and What It Doesn’t)

A complete kit from any of the big four usually includes the head unit, the drive system (belt, idlers, tensioner, pulleys), intercooling, intake tubing, the fuel parts the kit needs at its rated power, and a tune. Based on the S650 listings we checked:

  • Head unit and drive: the blower itself, a belt drive with tensioner and idlers. Whipple’s S650 kit uses a 6-rib belt drive; ProCharger offers 6-rib and 8-rib drives.
  • Intercooling: twin-screw and TVS kits use air-to-water intercoolers with a front heat exchanger, pump, and reservoir. ProCharger uses an air-to-air intercooler.
  • Fuel parts: VMP lists 56 lb injectors on its S650 Stage 1; Roush lists high-flow injectors and billet fuel rails on its S650 Phase 2; Whipple lists billet rails and high-flow injectors on its 2018-2023 kits; ProCharger lists “fuel upgrade components” on its full S650 system.
  • Tune: Whipple and VMP S650 kits include a Tomahawk flash tool; Whipple’s 2018-2023 kits list an HP Tuners MPVI4; Roush uses its own Roush Diagnostic Tuning software; ProCharger’s full system includes ECU and TCU tuning.
  • Plugs: Roush lists colder heat range, reduced gap Ford Performance spark plugs in its S650 Phase 2 kit.

What usually isn’t included: a stronger clutch or driveline, gauges, an upgraded fuel pump for big power on E85, and the labor. Roush also notes its intake is sold separately on its S650 listings. Read the parts list for your exact kit before you plan the budget. For a real example of buying a blower in pieces, see our Roush TVS 2650 supercharger eBay find, a bare head unit and lower intake for the Gen 3 GT, and the list of parts it still needs.

Supporting Mods for a Supercharged Coyote

At the maker’s rated power on 93 octane, a complete kit is designed to work on a healthy, stock engine. Once you go past that with smaller pulleys, ethanol, or a custom tune, these are the areas that need attention. The order below is the order we would budget for.

Tune

Boost without the right calibration breaks engines. Roush’s S650 installation manual says running the engine without the Roush PCM recalibration will result in engine damage or failure and void the warranty. If you change pulleys, fuel, or other hardware, the tune has to change too. See our tuner guide for handhelds, custom tuning, and E85.

Fuel system

Complete kits size the injectors for their rated power on pump gas. More boost or an ethanol blend can run the stock fuel pump out of capacity. Common next steps are a pump voltage booster, a higher-flow in-tank pump, or a return-style fuel system on big-power cars. Have your tuner log fuel pressure and duty cycle before you guess.

Spark plugs one step colder

Boosted engines generally want a colder spark plug with a tighter gap to resist detonation and spark blowout. Roush includes colder plugs in its S650 Phase 2 kit. If your kit doesn’t, ask the kit maker or your tuner for the recommended plug and gap. Our Coyote spark plugs and coil packs guide covers the basics.

Cooling and the heat exchanger

Heat is the enemy of a positive-displacement kit. Keep the heat exchanger clean, bleed the intercooler loop completely after install, and watch intake air temperature on long pulls. Roush’s manual warns that the system is sensitive to corrosion and says to use only the vehicle maker’s recommended coolant in the intercooler loop. Track-day cars and hot-climate cars may want a bigger heat exchanger or an ice tank for the strip.

Oil

Check what your kit maker requires. Roush’s S650 installation manual calls for 5W-50 full synthetic oil and an oil change at the time of install. Our Coyote oil change guide covers capacity and filters, and a catch can is cheap insurance against oil vapor in the intake under boost.

Clutch and driveline

The factory clutch on an MT-82 car is usually the first part to give up behind a supercharger. Plan for an upgraded clutch on manual cars; our Mustang GT clutch upgrade guide covers the choices. On IRS cars, half shafts and axles become a concern with sticky tires and hard launches. Rear gears change how the car puts power down, too; see our rear gears guide.

Gauges and monitoring

At minimum, be able to see boost, air-fuel ratio, intake air temperature, and knock. Many owners use a digital gauge or a phone app tied to the OBD port, and some kits include an extra post-intercooler air temperature sensor. A wideband air-fuel gauge is a smart add on any boosted car.

Exhaust

A supercharged Coyote will run on the factory exhaust, and makers rate their kits that way. Headers and a freer-flowing exhaust can add more power but usually require tune changes and can affect emissions legality. Our long tube vs. shorty headers guide covers the options.

Supporting Mods by Power Level

These are our general planning guidelines, not maker requirements. Your kit, fuel, transmission, and tuner decide what you actually need.

GoalWhat usually worksWhat to add
Kit as rated on 93 octaneComplete kit with its tune, fresh oil, plugs the maker specifiesGauges, a catch can, a healthy clutch on manual cars
Smaller pulley or more boostKit plus a custom or maker-upgrade tuneFuel pump help, colder plugs, better cooling, clutch and half shafts or axles
Ethanol blend (E30 to E85)Custom tune with flex-fuel supportBigger fuel pump or return system, injectors sized for ethanol, ethanol content sensor
Drag strip or road courseKit plus a tune that suits the useDriveline, cooling, brakes, tires, and the safety items your sanctioning body requires. See our Coyote drag build guide and 10-second build.

Want to see a factory-backed Whipple Coyote? We found a 5k-mile 2011 Shelby GT350 45th Anniversary on Bring a Trailer. Shelby rated its Ford Racing/Whipple-blown Gen 1 Coyote at 525 hp.

Coyote Generation Fitment Notes

GenerationYearsFitment notes
Gen 12011-2014 S197Port injection only. Kits are Gen 1-specific. VMP lists a 2.3L TVS Level 1 kit; many cars run used kits.
Gen 22015-2017 S550Port injection only. Kits are specific to these years; check current maker listings and plan for the S550 IRS.
Gen 32018-2023 S550Port and direct injection; the most kit choices. Whipple lists separate kits and CARB orders for 2018-2021 and 2022-2023.
Gen 42024+ S650Dual throttle body intake; current kits from all four makers. Watch model-year coverage on emissions orders (Whipple’s CARB EO covers 2024-2025 only).

Special models like the Bullitt, Mach 1, Dark Horse, and GT350 can have different kits or fitment. ProCharger, for example, lists its 2018-2023 kits for the Mach 1 and Bullitt as well. Always order by exact year, model, and transmission.

What a Supercharged Coyote Really Costs

Kit prices above are list prices from the makers. The rest of this table is our rough planning range, and it swings a lot with shop rates, location, and what your car already has.

ItemRough range (hedged)Notes
Complete kitAbout $7,999 to $10,500 listPer the maker pages above; dealer pricing and sales vary
Professional installOften roughly $1,000 to $3,000+Roush rates about 10 hours for a skilled installer; Roush warranty assumes an authorized dealer
Custom or dyno tune (if not included)Often roughly $500 to $1,200+Only if you change hardware or buy a tuner kit
Clutch (manual cars)Often roughly $800 to $2,500+ plus laborSee our clutch guide
Fuel system upgradesRoughly $200 to $2,500+Pump voltage booster up to a return system
Gauges, plugs, oil, coolantRoughly $150 to $800Small parts add up
Half shafts, axles, cooling upgradesRoughly $500 to $4,000+Mostly for drag, track, or above-rated power

A realistic all-in budget for a kit, install, and the basics is often a good bit more than the kit alone. Plan for it now rather than parking a half-finished car later.

Warranty and Emissions: What to Check Before You Buy

This is general information, not legal advice. Rules change and vary by state and country, so check with your state’s emissions agency, the kit maker, and your dealer.

  • CARB Executive Orders: In California and states that follow its rules, an aftermarket supercharger generally needs a CARB EO number for your exact model year to be street legal. Whipple, Roush, and VMP list EO numbers on the kits above. Coverage is year-specific: Whipple’s S650 order covers 2024-2025 only.
  • Installed as supplied: Whipple’s page says its EO applies when the system is installed as supplied with Whipple’s calibration. Changing the pulley, the tune, or the exhaust can take a kit out of compliance.
  • Factory warranty: A supercharger can affect Ford’s new-vehicle warranty coverage on related parts. Talk to your dealer before you install anything.
  • Kit powertrain warranties: Whipple, VMP, and ProCharger list powertrain warranty options, and Roush includes warranty coverage. Read the terms: most require the kit as supplied, the maker’s tune, specific fuel, and sometimes dealer installation.
  • Insurance: Tell your insurer about the modification. A surprise after a claim is the worst time to find out it matters.

Common Coyote Supercharger Mistakes

  • Buying the kit before the budget. The kit is the biggest single check, but install, tune, clutch, and fuel can add thousands.
  • Skipping the health check. Do a compression or leak-down test and fix leaks before you add boost, especially on high-mileage cars.
  • Running a smaller pulley on the stock tune. Every hardware change needs a matching calibration.
  • Cheap fuel. Makers rate their kits on 93 octane. Roush says 91 or higher is required and recommends against octane boosters.
  • Poor intercooler bleeding. Air in the intercooler loop means high intake air temperatures and pulled timing.
  • Ignoring the clutch and driveline. A slipping clutch or a broken half shaft ends the fun fast.
  • Buying an incomplete used kit. Missing brackets, hoses, or the wrong generation parts can cost more than the savings.
  • Not watching gauges. Boost, air-fuel ratio, and air temperature tell you trouble is coming before the engine does.

Tools Needed

A complete kit can be installed at home by an experienced owner with the right tools, but many owners have a shop do it, and the Roush warranty assumes an authorized dealer install. If you are doing it yourself, here is the toolbox we would have ready.

  • Metric socket and ratchet set (1/4″, 3/8″, 1/2″ drive) — most kit hardware is metric
  • Click-type torque wrench — every blower bolt has a torque value in the manual: Amazon
  • Inch-pound torque wrench — for small fasteners on the intake and fuel rails
  • Serpentine belt tool — for the factory and blower belts
  • Fuel line disconnect tool set
  • Spill-free coolant funnel — helps fill and bleed the cooling and intercooler loops
  • Coolant vacuum fill tool
  • Trim and clip removal tool set
  • Floor jack and jack stands
  • Drain pan
  • OBD2 scanner — to check codes and data after install
  • Spark plug socket and gap tool — check the kit maker’s plug size and gap
  • Hose clamp pliers
  • Nitrile gloves and shop towels

Parts Needed

Your kit’s parts list comes first. These are the extra parts most supercharged Coyotes end up needing. Match every part to your exact year, model, and transmission, and to what your kit maker or tuner recommends.

  • Supercharger kit for your exact year — Whipple, Roush, ProCharger, or VMP: Amazon
  • One-step-colder spark plugs — if your kit doesn’t include them: Amazon
  • 5W-50 full synthetic oil — if your kit maker calls for it, as Roush does on the S650: Amazon
  • Oil filter
  • Ford-recommended coolant — for the engine and intercooler loops; check your owner’s manual
  • Boost and air-fuel gauges — or a digital OBD gauge: Amazon
  • Fuel pump voltage booster — only if your tuner calls for more fuel
  • Upgraded fuel pump — for ethanol blends or above-rated power: Amazon
  • Ethanol content (flex fuel) sensor kit: Amazon
  • Upgraded clutch (manual cars)
  • Supercharger belt (spare) — match the kit maker’s belt length: Amazon
  • Oil catch can — see our catch can guide: Amazon
  • Intercooler pump (spare or upgrade)
  • Heat exchanger upgrade: Amazon
  • Handheld tuner — only if your kit doesn’t include one

Our Take

For most S650 and Gen 3 S550 owners who want a daily driver with huge power, a twin-screw kit from Whipple or VMP, or a TVS kit from Roush, is the straight answer: big torque, factory looks, a CARB order on the right years, and warranty options. If you love top-end pull, want to keep the car calmer around town, or plan to keep turning up the boost, ProCharger is hard to beat. Whichever you choose, put the tune, fuel, clutch, and cooling in the budget from the start. For the bigger plan, see our Coyote 5.0 build guide, and if you are still deciding whether you need boost at all, start with a cold air intake and a tune.

Want to see a Roush blower on a real car? Our BaT find on a 2,200-mile Roush-supercharged 2014 Mustang GT convertible shows a Gen 1 TVS build with long tubes, a Truetrac and a twin-disc clutch.

Want to see what a factory-backed Whipple build looks like? Our BaT find on a 304-mile 2023 Shelby Centennial Edition Mustang GT covers a 750-hp Whipple Gen 3 Coyote car, #98 of 100.

For a factory-finished example of a Whipple Coyote, see our Bring a Trailer find on an 830-mile 2024 Shelby Super Snake, rated at 830 hp by Shelby American.

To see a VMP Odin on a real car and a complete Saleen supercharger package side by side, check our Bring a Trailer finds on a supercharged 2022 Mach 1 and a 2025 Saleen S302 Black Label.

To see a Gen 4 blower setup on a real car, read our find on a VMP Stage 4 supercharged 2025 Mustang GT with long-tube headers and upgraded oiling.

FAQ

How much horsepower does a supercharger add to a Coyote?

It depends on the kit and the car. Maker ratings for current S650 kits range from ProCharger’s “325+ hp gain” to Whipple’s “up to 875 hp” crank rating for its Stage 2 on 93 octane. Whipple and Roush rate 2018-2023 S550 kits at 750 hp. Real-world results vary with fuel, weather, and dyno.

Is a Whipple or a ProCharger better?

Neither is better for everyone. A Whipple twin-screw makes boost right away and feels like a bigger engine everywhere. A ProCharger builds boost with rpm, runs cooler, and is easier to hook on street tires. Choose by how you want the car to drive.

Can a stock Coyote handle a supercharger?

Complete kits from the major makers are designed and tuned for healthy stock engines at their rated power on the fuel they specify. Going past that with more boost, ethanol, or aggressive tuning raises the risk, and the engine, fuel system, and driveline may need upgrades. If you are planning that much boost on a Gen 3, our forged Coyote long block eBay find shows what a used built engine looks like and what to ask about it.

Are Coyote superchargers street legal?

Some are, for specific model years. Whipple, Roush, and VMP list CARB EO numbers for the kits above, and Whipple says its S650 order covers 2024-2025 only. Check the EO for your exact year and your state’s rules. This is not legal advice.

Will a supercharger void my Ford warranty?

It can affect coverage of related parts. Some kits offer their own powertrain warranty, including options from Whipple, VMP, ProCharger, and Roush, but they come with conditions. Talk to your dealer and read the kit’s warranty terms before you buy.

Do I need a new clutch with a supercharger?

On manual cars, usually yes, or soon after. The factory clutch was not designed for supercharged torque. Automatic cars may need tuning and, at high power, transmission upgrades.

How long does it take to install a Coyote supercharger?

Roush rates its S650 kits at about 10 hours depending on skill, tools, and the dealer. A first-time DIY installer should plan on a full weekend or more.

Photo: ProCharger Supercharger Systems, CC BY-SA 4.0, via Wikimedia Commons (cropped).

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *